aun no he podido solucionarlo ....por alli he leido que tengo que pasarlo a android 5 que alli ....oscam es estable...pero algunos dicen que no es recomendable pasar de android 5 a android 6...seguire viendo a ver como se puede solucionar

Pues a mi. Me funciona en 6.0.1 y bien oscam mànager versión 1.0.2

Enviado desde mi MI MAX 2 mediante Tapatalk

Sigo teniendo el mismo problema. He restablecido todo a fabrica en androis 6.0, pero nada. He probado oscam manager 1.02 y 1.03, pero nada. Empezo a ir mal cuando me cambié a weos 3.0.

creo que tienes mucha suerte , porque en distintos foros tienen el mismo problema y solo a ti funciona bien el deco , suerte y sigue disfrutando

To downgrade your device to Android 5, you need to follow these two steps.

BE AWARE TO NOT ATTEMPT THIS PROCEDURE IF YOUR DEVICE IS NOT A WETEK PLAY 2!

Before you start, please read the entire procedure and if you have any doubts please inquiry all your questions to me before you proceed :)

Step 1 *

You need to download these files:
https://mega.nz/#F!0xhjkThL!2JCAgXaZZfCbQXzNogheDQ

Extract it until you get 4 files listed like this (Do not need to be in the same order)

    .zip file
    dtb
    factory_update_param
    recovery

Copy them to a formatted (FAT32) SDcard

After you have copied the files to your SDcard, follow these steps:

    Insert the SDcard with the files in your device.
    Power Off your device
    Disconnect your power supply.
    Underneath your Device, you have an update button (Small Hole)
    With the update nail provided in your package, press and hold that update button
    While pressing, connect your power supply
    Keep pressing the button for 10 more seconds.

After the 10 seconds, the installation will start automatically.

You can follow this video to help you apply the steps I mentioned above,
http://tutorials.wetek.com/tutorial/9

If your device does not boot and is only on a back screen state, do not worry, this is normal.
Step 2 will solve this.

Step 2 *
This is a similar process to the first. But you will need to download a different file now.

You need to download these files:
https://mega.nz/#!gkRXWCrY!nKSaw3bGT...ldFHbgnd6VBCCg

You should get a file like this:

   - aml_autoscript

Copy it to a formatted (FAT32) SDcard

After you have copied the file to your SDcard, follow these steps:

    Insert the SDcard with the file in your device.
    Power Off your device
    Disconnect your power supply.
    Underneath your Device, you have an update button (Small Hole)
    With the update nail provided in your package, press and hold that update button
    While pressing, connect your power supply
    Keep pressing the button for 10 more seconds.

After the 10 seconds, your device should enter in the recovery menu.

From the recovery menu, you need to select, Wipe Data, Factory Reset.
After this, reboot your device.

It should now be working properly.

If you have any doubts on how to perform this, please do not hesitate to ask.

hola
yo sigo el manual de degradar y no me hace nada
entro en el menu y no me hace ni el reset de fabrica

A mi tampoco me funciona bien Oscam con Android 6.0

Me parece q haré downgraded a 5.0....Sabeis de algún tutorial para configurar OSCAM??

Enviado desde mi SM-G935F mediante Tapatalk