---

Sim2-DM800-Newnigma2 v4.0.11 SIM2 #84d Jasper (2014-08-27)





Clean, no changes.

Sim2

SSL84d

Enigma2: MARWEN-tarball (thx)

################################################## #######################################

Webinterface is working.
Teletext is working.

################################################## #######################################

Deactivate Firmware Update (Newnigma2 Services/System Tools/System Settings)

################################################## ######################################

Download:


2014-08-26



Jasper

################################################## ###################
Newnigma2 team proudly presents:
Newnigma2 v4.0.11
################################################## ###################

Basics:
Enigma2 4.0: 24.06.2014
Enigma2 Plugins: 11.07.2014
Newnigma2 Plugins: 11.07.2014

DM 800 HD PVR
driver: 28.12.2013
secondstage: 84
kernel: 2.6.18


changelog E2 24.06.2014:
Use the setting "Automatic wakeup from standby for zap timer" for idle mode, too
Hbbtv: fixed playback of zdf video streams
Fixed possible crashes on enigma2 start
Reworked .cuts file handling to work properly on network storage
(and fixed possible crashes during recordings)

changelog E2 16.06.2014:
correctly apply AC3/PCM delay on mediafile play (MKV, MP4....)
small datetime converter fix
HdmiCec:
- broadcast system standby instead of sending it only to the tv (fixes AVR's not turning off)
- impelment basic volume punchthrough
- add hack for not working CEC poweroff on strange TVs not provides a EDID when powered off
- fixed possible lost cec commands on enigma2 shutdown
fixed possible crash on harddisk re-init, allow fsck for ext4 (thx to jophi)
re-read .cuts file during playback when needed (e.g. record stopped)
dont overwrite .cuts file on record stop... just append event markers
see more information
added US_ULTRA and US_JUMBO band to cablescan
add needed changes for current DVB-C tuner transponder search tools
fixed crash (TYPO) on mute press (delete) on end of textfield

changelog E2 14.03.2014:
updated translations
added some audio/video type extensions


Notice: Update from v4.0.x to 4.0.11 only possible by updating via console.

Changes:
Added: Skin Evolution-HD by Kerni (thx)
Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
Added: Kerni.Gnome-HD by Kerni (thx)
Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
Added: mediaportal
Added: swapmanager
Added: wget
Added: stat
Added: weathercomponent (needed for some skins)
Added: eventposition (needed for some skins)
Added: reftopiconname (needed for some skins)
Added: ledmanager (be carefully changed source="ButtonGreentext" to source="key_green") screen for skinner
Added: Black-Box.HD.ME (32bit skin)
Added: cryptsetup more information
Added: newnigma2-servicerestart: restart services via gui, like init.d, if telnet is not reachable screen for skinner
Added: free space check's before installing or upgrade packages
Added: min free flash space is 3mb for installing/upgrading some packages
Added: improve network connectivity check in newnigma2 installer
Added: new skin option: progress_pointer (since E2 14.02.2014 possible) screen for skinner
Added: readded extendedinfobar
Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
Bugfix: neutrino keymap
Bugfix: newnigma2.Kerni.PanTV-HD icons
Bugfix: Caid Renderer didn't close ecm.info and share.info properly
Bugfix: for loading wrong or no newnigma2 service menu png's
Bugfix: loosing picon value in servicelist after using configsaver
Bugfix: for not shown all skins in nenwigma2 installer skin section, like tikila skins
Bugfix: prevent of loading skin_infobar_wetter.xml on other skins then "newnigma2-" skins
Bugfix: broken gui installer
Update: Some improvements on our onlineinstaller
Update: znc to version 1.4
Update: openvpn to version 2.3.4
Update: german translation
Update: mediaportal to version 5.3.2
Update: added weatherfunction only for newnigma2-HD inforbar
(blue button -> newnigma2 services -> osd function -> weather infobar -> on)
Update: picon renderer. create piconSList dir for servicelist picons.
Update: IPTV-List-Updater
Removed: we have removed non working plugins. most of them are integrated in mediaportal.
Removed: keymanger plugin from image. It's still available from our feed.
here u can find USB to UART driver
here u can find DreamUP V1.3.3.11


Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
Multiboot: No support for multiboot. Not planned. No need for such a tool.
GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.

Important changes:

1. Install picons on USB-Drives:
press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.

2. network configuration:
If the IP address assigned manually, as well as the address of the DNS server must be entered.
press menu button -> setup -> system -> network -> adapter settings

3. install or upgrading:
before installing/upgrading packages, we now check if at least are 3mb free space in flash.
ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
the package. if the min required space is not available than the installation aborts.
!! Attention enigma2 ipk needs at least 9mb !!

4. issue due upgrade to v4.0.11:
if you have troubles by upgrading to v4.0.11 even no 9mb free space for the enigma2 package, so
you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
ignore's now the 9mb needed from the package and uses instead the value you set in
"blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".

Wichtige Änderungen:

1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
"blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"

2. Netzwerk Konfiguration:
"Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.

3. Installation oder Update des System:
Es müssen nun mindestens 3 MB freier Flashspeicher zur Verfügung stehen um Installationen/Updates vorzunehmen.
Vor Installation eines ipk's vom newnigma2 team, wird geprüft, ob für dieses Paket noch genügend freier Speicher vorhanden ist.
Sollte das nicht der Fall sein, bricht die Installation ab.
!!Achtung das enigma2 Paket benötigt min 9MB!!

4. Bei Problemen mit dem Update auf v4.0.11:
Sollte das Update auf v4.0.11 nicht funktionieren, weil dem enigma2 Paket keine 9MB zur Verfügung stehen, so ist zuerst der newnigma2 installer zu aktualisieren.
Nach anschließendem reboot kann man den Upgradevorgang via gui fortsetzen. Dabei wird der Check des freien Speichers beim Upgrade auf den Wert gesetzt, der unter
"blaue Taste -> Newnigma Services -> System Werkzeuge -> Experten Einstellungen -> min. free space" eingestellt ist.

---

OpenATV-4.2-beta-dm800se #ssl84d



What's new in the OE-A Build Environment 2.3?

• Open Embedded Core August 2014
• gcc 4.9.1
• openSSL
• Time Zone updates
• Many Linux tools and libs
• Update Openweb interface with support
• Now with Auto Timer Support
• Now with bouquet Editor Support
• Update openATV Skin div Screens Revision.
• E2 latest updates and fixed the last 2 weeks
• Plugins on Feed up to date
• CoolTV Guide 7.3
• DreamPlex 2.0
• LCD4Linux
• Fritzcall
• and much more.

This image is a 100% build from OpenATV source code.
You can safely use the online update function, I tricked the driver date 100 years in the future so the present (and working) drivers are not overwritten during update.
I added the secret-feed (softcams) and changed the default language to US. It's a 100% clean image !

Please note: The image is still under development, so don't expect everything to work.

Online updates are working !

Features:
source: 20140824
drivers: 20131001 (patched)
bootloader: ssl84d
size: 57.7Mb
skin: MetrixHD









Image flashing:
Internet Explorer (recommended)
SUNRAY-FlashUP
Powercycle after flashing

OpenATV-4.2-beta-dm800se #ssl84d

---

NONSOLOSAT OE2.0 V6.2 -2014-09-8- DM800SE-ramiMAHER#ssl84D


sim2


enigma2 patched : by ramiMAHER









Date: 2014-09-08 15:10
Enigma2: 3.999git20140314-r19.0
Distro: opendreambox 2.0.0
Machine: Dreambox dm800se
MD5: 22ac5465e5413ff7a302513d6768b04a
SHA256:edc3334057c1c3796c89479834137e71626eebe9d9b 56daca55eb 3253289378d

-I FIRMWARES IN OGGETTO NON CONTENGONO CHIAVI O EMULATORI DI NESSUN GENERE E CONTENGONO SOLO TRE LINGUE ITALIANO INGLESE E TEDESCO COMUNQUE POTETE SCARICARE TUTTO DAL NOSTRO PANNELLO.
-NONSOLOSAT FORUM NON E' RESPONSABILE IN NESSUN CASO DELL'USO CHE GLI UTENTI FARANNO DI QUESTI PROGRAMMI.

-Raccomandiamo di non fare aggiornamento software
possibilmente mettere immagine in flash

-skin default metrixHD
-Swap File nonsolosat
-Driver DVB-T
-NONSOLOSAT Info Memory


DOWNLOAD

---

OoZooN-dm800se-OE2.0-2014-09-28-ramiMAHER#ssl84D


sim2


enigma2 patched :2014/09/24: by ramiMAHER



Code:
Date: 2014-09-28 15:29
Enigma2: 3.999git20140924-r9.0.1
Distro: opendreambox 2.0.0
Machine: Dreambox dm800se
Feed: http://www.oozoon-dreamboxupdate.de/...0/experimental
Issuer: OoZooN
Homepage: www.OoZooN.tv
MD5: caf69a18531d7a10e3ecdfd42dedfe77
SHA256: efd0ec8304795ba681edd9b30228bdd4360893a0c83c173700 ee786c0f12ff7b


DOWNLOAD

---

TSimage-3.0-OE-2.0-dm800se-2014-09-28-ramiMAHER#ssl84D


sim2


enigma2 patched :2014/09/24: by ramiMAHER



Code:

DOWNLOAD

---

---

newnigma2-unstable-lean-dm800se-17-10-2014-ramiMAHER#ssl84D


sim2


enigma2 patched :2014/09/24: by ramiMAHER





DOWNLOAD

---

openld-1.7.0-dm800se-ramiMAHER#ssl84D

sim2





DOWNLOAD

openld-1.7.0-dm800se-ramiMAHER#ssl84D

---

Italysat-6.0.146-dm800se-2014-10-02-ramiMAHER#ssl84D


sim2






=============== Date: 02/10/2014, SVN 146 ==============
- Fix Feeds Offline

=============== Date: 29/09/2014, SVN 146 ==============
- New Multiboot 3.0: This is a gift of anticipation of 7.0


DOWNLOAD

---

openLD-1.8.0--29-10-2014-dm800se-ramiMAHER#ssl84D

sim2




DOWNLOAD